Sliding gate

  • A-300 SL

    0 out of 5

    24V residential operator for gates up to 300kg. Maximum ease of installation ensured thanks to the new system of self-adjusting limit switches with encoder. Thanks to the D-Track system, the installations are always safe and in compliance with binding standards.

  • ARES 1500

    0 out of 5

    A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not “read” the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.

  • DEIMOS

    0 out of 5

    Range of residential operators, extremely simple to install and completely safe to use thanks to full compliance with the current European standards. Available with electromechanical or inductive limit switches.

  • DEIMOS 700

    0 out of 5

    Range of residential operators, extremely simple to install and completely safe to use thanks to full compliance with the current European standards. Available with electromechanical or inductive limit switches.

  • DEIMOS 700 KIT

    0 out of 5

    The operator for residential sliding gates. For gates weighing up to 6/7/8 500/700/800Kg and length m. They have a motor powered by 230 volts and a built-in control panels ALPHA. Operator DEIMOS 800F has a built-in electronic motor brake, which provides an immediate stop of the gate when activated limit switch. Integrated radio Rolling code allows up to 63 pilots. The operator is equipped with a mechanical clutch. Gate after colliding with the obstacle is pushing on it with a force dependent on the setting of the clutch.

  • DEIMOS 800 F

    0 out of 5

    Range of residential operators, extremely simple to install and completely safe to use thanks to full compliance with the current European standards. Available with electromechanical or inductive limit switches.

  • DEIMOS BT A

    0 out of 5

    A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not “read” the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.

  • DEIMOS BT A400

    0 out of 5

    A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not “read” the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.

  • DEIMOS BT A400 V

    0 out of 5

    A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not “read” the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.

  • DEIMOS ULTRA BT A

    0 out of 5

    A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not “read” the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.

  • DEIMOS ULTRA BT A400

    0 out of 5

    A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not “read” the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.

  • DEIMOS ULTRA BT A400 V

    0 out of 5

    A smart torque management system based on the microprocessor technology of BFT control units. Acquiring data from several indicators, it updates the level of thrust required to perform the operation. D-Track also facilitates the installer in providing for the certifications required by law. Conventional control units do not “read” the exact position of the gate and consequently apply constant thrust levels, without ensuring stable sensitivity during the opening and closing operations.

error: Sorry, This Content is Protected!!